Datastage – When checking operator: Operator of type “APT_TSortOperator”: will partition despite the preserve-partitioning flag on the data set on input port 0

APT_TSortOperator Warning
APT_TSortOperator Warning

The APT_TSortOperator  warning happens when there is a conflict in the portioning behavior between stages.  Usually, because the successor (down Stream) stage has the ‘Partitioning / Collecting’ and ‘Sorting’ property set in a way that conflicts with predecessor (upstream) stage’s properties, which it is set to preserver.  This can occur when the successor stage has the “Preserve Partitioning” property set to:

  • ‘Default (Propagate)’
  • ‘Propagate’, or
  • ‘Set’
Preserve Partitioning Property - list
Preserve Partitioning Property – list

Message ID

  • IIS-DSEE-TFOR-00074

Message Text

  • <<Link Name Where Warning Occurred>>: When checking operator: Operator of type “APT_TSortOperator”: will partition despite the preserve-partitioning flag on the data set on input port 0.

Warning Fixes

  • First, if the verify that the partitioning behaviors of both stages are correct
  • If so, set the predecessor ‘Preserve Partitioning’ property to “Clear”
  • If not, then correct the partitioning behavior of the stage which is in error

Clear Partitioning Property Screenshot

Preserve Partitioning Property - Set To Clear
Preserve Partitioning Property – Set To Clear

Infosphere DataStage – Boolean Handling for Netezza

Beware when you see this message when working with Boolean in DataStage, the message displays as informational (at list it did for me) not as a warning or an error.  Even though it seems innocuous, what it meant for my job, was the Boolean (‘true’ / ‘false’) was not being interpreted and everything posted to ‘false’.

In DataStage the Netezza ‘Boolean’ field/Data SQL type maps to the ‘Bit’ SQL type, which expects a numeric input of Zero (0) or one (1).  So, my solution (once I detected the problem during unit testing) was to put Transformer Stage logic in place to convert the Boolean input to the expected number value.

Netezza to Datastage Data Type Mapping

Netezza data types

InfoSphere DataStage

data types (SQL types)

Expected Input value

BOOLEANBit0 or 1 (1 = true, 0 = false)

Transformer Stage logic Boolean Handling Logic

A Netezza Boolean field can store: true values, false values, and null. So, some thought should be given to you desired data outcome for nulls

This first example sets a that the nulls are set to a specific value, which can support a specific business rule for null handling and, also, provide null handling for non-nullable fields.  Here we are setting nulls to the numeric value for ‘true’ and all other non-true inputs to ‘false’.

If isnull(Lnk_Src_In.USER_ACTIVE) then 1 Else if Lnk_Src_In.USER_ACTIVE = ‘true’ Then 1 Else 0

These second examples sets a that the nulls are set by the Else value, if your logic direction is correct value and still provides null handling for non-nullable fields.

  • If  Lnk_Src_In.USER_ACTIVE = ‘true’ Then 1 Else 0

  • If  Lnk_Src_In.USER_ACTIVE = ‘False’ Then 0 Else 1

Director Log Message

Message ID

  • IIS-DSEE-TBLD-00008

Message Text

  • <<Link Name Where Message Occurred>>: Numeric string expected. Use default value.

Or something like this:

  • <<Link Name Where Message Occurred>>: Numeric string expected for input column ‘<<Field Name Here>>‘. Use default value.

Related References

Boolean

PureData System for Analytics, PureData System for Analytics 7.2.1, IBM Netezza user-defined functions, UDX data types reference information, Supported data types, Boolean

https://www.ibm.com/support/knowledgecenter/en/SSULQD_7.2.1/com.ibm.nz.udf.doc/r_udf_boolean_datatype.html

Data types and aliases

PureData System for Analytics, PureData System for Analytics 7.2.1, IBM Netezza stored procedures, NZPLSQL statements and grammar, Variables and constants, Data types and aliases

https://www.ibm.com/support/knowledgecenter/en/SSULQD_7.2.1/com.ibm.nz.sproc.doc/c_sproc_data_types_aliases.html

Logical data types

PureData System for Analytics, PureData System for Analytics 7.2.1, IBM Netezza database user documentation, Netezza SQL basics, Data types, Logical data types

https://www.ibm.com/support/knowledgecenter/en/SSULQD_7.2.1/com.ibm.nz.dbu.doc/r_dbuser_data_types_logical.html

Data type conversions from Netezza to DataStage

InfoSphere Information Server, InfoSphere Information Server 11.5.0, Connecting to data sources, Databases, Netezza Performance Server, Netezza connector, Designing jobs by using the Netezza connector, Defining a Netezza connector job, Data type conversions, Data type conversions from Netezza to DataStage

https://www.ibm.com/support/knowledgecenter/en/SSZJPZ_11.5.0/com.ibm.swg.im.iis.conn.netezza.use.doc/topics/nzcc_mappingdatatypes.html

InfoSphere DataStage – Operations Manual Template

When projects transition to production, the receiving team need some transition documentation to help with knowledge transfer and to guide them while they get accustomed to operating the application and can form their own documentation.  This temple is a shell, which usually provides enough detail, with some updating, to provide a quick reference regarding the application.  Also, having a temple can be a real time-saver, as opposed to writing it from scratch.

Related References

Infosphere DataStage – Designer Client Repository Structure

Default Repository Structure

When a project is created, there is a default repository structure created for use in the DataStage designer client.

However, some additional organization will be required for most DataStage projects.  Usually, this organization occurs in in these areas:

  • Addition of structure within the “Jobs” folder
  • Addition of a “Parameter Sets” folder
  • Addition of structure within the “Table Definitions” folder
  • Addition of a “Developer Work Area” folder

Repository Structure within the “Jobs” folder

Below is a sample of a folder structure for multiple applications that share a common Repository.  Pattern includes, but does not illustrate all other delivered folders. In addition to the core folder structure, developers can create individual working, test, and in progress folders, which do not migrate, but keep work segregated.

Parameter Sets Folders

The parameter set folders or for two sets of information.

  • First, are the database parameters, which include data connections and the attached parameter sets.
  • The second, for job parameters, which may include parameter sets, for things like e-mail parameters, surrogate key file paths, etc.; which is a best practice, rather creating them as project level parameters.

Table Definitions

The Tables Definition folder have folders added to segregate the imported meta data for source and target system and, in some case, may need folders to logically organize imported meta which may reside within the same database and/or schema, but belong to different logical layer.

InfoSphere DataStage – DataStage Parallel Job Peer Code Review Checklist Template

Peer code review happens during the development phase and focuses on the overall quality and compliance to standards of code and configuration artifacts. However, the hard part of performing a Peer code review isn’t, performing the review, but rather to achieving consistency and thoroughness in the review.   This is where a checklist can contribute significantly, providing a list of things to check and providing a relative weight for the findings.  I hope this template assists with your DataStage job review process.

Infosphere Datastage – Standard Practice- Sequence Naming Conventions

Standard practices help you and other understand your work.  This can be very important when working on large teams, working across team boundaries, or when large complex sets of process and objects may be involved.  When you consider the importance of naming convention, when coupled with standard practice, the benefit should be obvious, but often practice doesn’t execute or document their conventions.  So, these standard naming conventions may help when none exist or you need to assemble your own naming conventions.

<<SomeIdentifier >> = should be replaced with appropriate information

  1. Sequence Object Naming Conventions
EntityConvention
Master Control Sequence (parent)Master_<<Application>>_ <<Application Job Stream Name>>_Seq
Sequence<<Application>>_<<job_Name>>_Seq
  1. Sequence Stage Naming Conventions
EntityConvention
End LoopEL__<<PrimaryFunction>>
Error Handler EH_<<PrimaryFunction>>
Execute CommandEC_<<PrimaryFunction>>
Job Activity Job_<<PrimaryFunction>>
Nested Condition NC_<<PrimaryFunction>>
Notify Notify_<<PrimaryFunction>>
Routine Activity Rtn_<<PrimaryFunction>>
Sequence Links (messages) Msg_<<Number or Description>>
Sequence Links (Non-messages) Lnk_<<Number or Description>>
SequencerSeqr_<<Number or Description>>
Sequencer (All) SeqAll_<<Identifier>>
Sequencer (Any) SeqAny_<<Identifier>>
Start LoopSL__<<PrimaryFunction>>
Terminator ActivityTA__<<PrimaryFunction>>
User VariablesUV__<<PrimaryPurpose>>
Wait For File WFF__<<PrimaryFunction>>

Related References

InfoSphere DataStage – Ways to Create a Datastage Parameter Set

There are three primary ways to create a parameter sets and is a different practice from adding ‘User Defined’ variables in InfoSphere DataStage Administrator. The ways to create a parameter set are:

  • Create a parameter set from a data connection stage
  • Create a Parameter Set from the navigation of DataStage designer, and
  • Create a Parameter Set from a job

Create a parameter set from Data Connection Stage

This is used to create parameter sets for Database connections parameters

To create a new Parameter Set from a Data Connection

  • Select: File > New > Other and select “Data Connection
  • Complete the data Connection stage properties, then save the stage.
  • Open the Connection stage and navigate to the “Parameters” Tab
  • Then, click on the “Associated Parameter Set” button, and Chose the “Create & Attach” menu item
  • This will Launch a Dialog
  • Fill out the appropriate information on the General tab and the proceed to the Parameters Tab:
  • In the Parameters Tab, enter in the Parameters you wish to include in this Parameter Set
  • On the Values tab, specify a Value File name (please follow naming convention standards to prevent rework and other problems). This is the name of the file that will automatically be created on the Engine tier. This tab also allows you to view/edit values located in the value file.
  • Click OK to save the Parameter set.

Create a Parameter Set from the navigation of DataStage designer

This is, perhaps, the more traditional way of creating a parameter set.

To create a new Parameter Set

  • Select: File > New > Other and select “Parameter Set”
  • This will Launch a Dialog
  • Fill out the appropriate information on the General tab and the proceed to the Parameters Tab:
  • In the Parameters Tab, enter in the Parameters you wish to include in this Parameter Set.
Note: Existing Environment Variables can also added.
  • Create a Parameter Set from a job
    On the Values tab, specify a Value File name (please follow naming convention standards to prevent rework and other problems). This is the name of the file that will automatically be created on the Engine tier. This tab also allows you to view/edit values located in the value file.
  • Click OK to save the Parameter set.

This approach is, perhaps, less traditional, but is equally effective, if you find yourself creating additional jobs and now need to share the same parameters.  This is a quick and easy to generate a parameter set from an existing job.

To create a new Parameter Set from a job

  • Open the job that you want to create a parameter set for.
  • Click “Edit > Job Properties” to open the “Job Properties” window.
  • Click the “Parameters” tab.
  • Press and hold the Ctrl key, then select the parameters that you want to include in the parameter set.
  • With your parameters highlighted, click “Create Parameter Set”.  The Parameter Set window opens.
    • Enter a name and short description for your parameter set.
    • Click the “Parameters” tab; the parameters that you selected are listed.
    • Click the ”Values” tab.
    • Enter a name in the Value File name field, then press Enter.  The value for each of your parameters is automatically populated with the path name that you entered.
    • If a default value is not already set, enter a value for each parameter. For example, if the variable is a Pathname type, enter a default path name.
    • Click “OK” to close the Parameter Set window.
    • In the Save Parameter Set As window, select the folder where you want to save your parameter set and click Save. When prompted to replace the selected parameters with the parameter set, click Yes.
  • Click “OK” to close the Job Properties window.

Related References